Here is a video clip shot shortly before the snowfall in S.O., (Southern Ontario).

As you can see from this short clip, a variety of birds including Canadian Geese (we just call them Geese in Canada), Seagulls, and ducks are chilling at the mouth of a small creek that is fed by/ flows into Lake Ontario on the shoreline.

Towards the end of the clip there is a mild kerfuffle between the Geese, but as many Canadians know: they can be very territorial in general and command authority among other birds due to their size. Although I am sure you would have to ask the birds to check the validity of that statement.

That’s all for now, thanks for stopping by.

-S

Before our first snowfall, I took these shots of the Lake Ontario Shoreline facing south toward the U.S. The above image has been cropped, as I wanted to removed the distraction of the wooden construction fence and slight debris that was in-frame.  I’m not sure if it takes away from the photo to have the bottom cropped in this way: it’s hard to say since I took the shot. I think that its difficult to remove yourself from the background history of something when you saw the steps of its production- kind of makes you impervious to seeing it from virgin eyes. (That is a digression).

I enjoyed this vista: the staggering of the trees across the shoreline gives a nice depth of field. I was able to capture quite a bit of video from the area: I spotted a red tailed chipmunk,  a woodpecker, and a grouse nearer to a creek in that linked to the lake. Lots of ducks and Geese got along swimmingly at the mouth of the creek, chilling and hanging out in the water and by the shore.

The above shot is the path leading in from the road to the lake. I always enjoy shots like this: a road leading away from or towards you. As the observer, it is up to you to decide.

---

One weekend I stumbled upon this room divider while at a church Garage Sale.

I was not “in love” with the style: a puke green wooden border with some kind of rosy-beige fabric. To cap it all off, the trim on the inner panel between the wood border and the fabric panel was this weird totally dated pearly-pinky hue that was just *bleah*

It needed an update.

Supplies I used:

• One pair of needle nose pliers
• a staple gun
• material cut to size
• 8mm staples
• Rustoleum Charcoal paint
• Medium sized painting brush
• Small sized painting brush

1. Step One: removing the undesired trim. This was pretty easy, as the trim was secured with what looked like hot glue in a thin to medium bead
   around each panel. A firm tug easily allowed it all to come off cleanly.

   

2. Step two: (Not so) gently pulling apart the existing fabric from the wooden border. I started off from the top of each section of the divider by pulling out staples with my needle nose pliers. Once I got a good section opened up, I found that it was easier to just tug on the fabric and pull the remaining staples out that way. I was careful not to tug too hard so that the fabric ripped, but it was a pretty sturdy Jacquard so it held true for the most part.

   

3. Once I had my bare divider sections, I laid the entire thing on the floor to begin prepping for the big paint job. A light bit of sanding here and there, was needed, but the wooden border was not in bad shape: it was just the colour that I couldn’t stand!
4. Step four: Painting can be a troublesome task for some- and I used to dislike it the most when performing refreshes and updating things around my home. By learning a few tips and tricks over the years, I have been able to greatly improve my painting, and avoid my all too common disappointments at my finished products. One of the tricks I learned was to paint doors, and anything flat that involves panels in this order:
   I used Rustoleum brand Charcoal paint. It’s available at Home Depot in the paint section, and is pretty affordable at around $30. That may seem like a high price, but due to the viscosity of the paint, the quart size goes quite a long way.
   

   

   

5. Step five: Using the old fabric as a guide for the new; I ironed the material to make sure it was perfectly pressed and flat. Once ironed, attached the new fabric on the divider with 8mm staples and my trusty staple gun.

   

   **Note I still need to visit the fabric store to select the new trim. Updates coming soon!

And of course the candid photo of the newly created piece as it will be in its natural habitat..

 

I needed 9.5meters of low pile carpet trim, and I was able to find that in a 1/4 inch width quite easily at the fabric store for about $2.60 per meter.

The border makes the divider look “finished” and professional. I call this DIY a true success!

 

 

 

Just for fun and giggles, I created this video to showcase a few designs. Let me know what you think!

-s